Titanium Bar
Titanium bar jeung titanium Rodbisa dipaké dina bagian gambar pikeun elongation alus sarta lalawanan korosi alus teuing jeung paling loba dilarapkeun dina tekanan, kapal jeung dipaké dina sababaraha bagian fittings sarta potongan fastening, kawas titanium fasteners.Titanium bar jeung titanium rod ogé bisa loba dipaké dina alloy titanium kusabab sipat mékanis jeung kimia komprehensif na.Salaku tambahan, titanium bar sareng rod titanium tiasa dianggo dina klub golf sareng girder sapedah sareng alat médis.
Dua jenis titanium rod sadia: titanium rod murni jeung titanium alloy rod kayaning Ti-6AI-4V.Éta bisa dipaké dina mesin pesawat jeung bagian, bagian pakakas kimiawi (réaktor, pipa, exchanger panas sarta valves, jsb), hulls kapal, sasak, implants médis, tulang jieunan, produk olahraga sarta barang konsumén.
• Titanium Bar Bahan: Kelas1, Kelas 2, Kelas 5, Kelas 5, Kelas7 , Kelas9, Kelas11, Kelas12, Kelas 16, Kelas23 jsb
• Bar Wangun: Bar buleud, Bar datar, Bar Hex, Bar pasagi
• Diameter: 2.0mm-320mm, Panjangna: 50mm-6000mm, ngaropéa
• Kaayaan:Hot Forging & Hot Rolling, Cold Rolled, Annealed
• Standar:ASTMB348, AMS4928, AMS 4931B, ASTM F67, ASTM F136 jsb
| Titanium Alloys Bahan Ngaran umum | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0,20 Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0,15 Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
♦ Titanium Bar Komposisi Kimia ♦
| Kelas | Komposisi kimia, persén beurat (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur séjén Max.masing-masing | Unsur séjén Max.total | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0,015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0,015 | 0.40 | 5.56.75 | 3.5 4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | 0.12 0.25 | — | 0.12 0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0,015 | 0.25 | 2.5 3.5 | 2.0 3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12 0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04 0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | — | — | — | — | 0.1 | 0.1 |
♦Titanum Galunggung BarSipat Fisik ♦
| Kelas | sipat fisik | |||||
| Kakuatan regangan Min | kakuatan ngahasilkeun Min (0,2%, offset) | Elongation dina 4D Min (%) | Ngurangan Wewengkon Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
♦♦♦ Titanium Alloy Bahan Fitur: ♦♦♦
• Kelas 1: Titanium murni, kakuatan rélatif lemah sareng ductility tinggi.
• Kelas 2: The titanium murni paling dipaké.Kombinasi pangalusna kakuatan
• Kelas 3: kakuatan High titanium, dipaké pikeun Matrix-pelat dina cangkang jeung tube exchangers panas
• Kelas 5: The alloy titanium paling dijieun.Kakuatan anu luhur pisan.lalawanan panas tinggi.
• Kelas 7: résistansi korosi punjul dina ngurangan sarta lingkungan pangoksidasi.
• Kelas 9: kakuatan pisan tinggi na lalawanan korosi.
• Kelas 12: lalawanan panas hadé ti titanium murni.Aplikasi pikeun Kelas 7 sareng Kelas 11.
• Kelas 23: Titanium-6Aluminum-4Vanadium ELI (Tambahan Low Interstitial) Alloy pikeun aplikasi susuk bedah.
