Titanium Pipa jeung Tube
• Titanium pipah jeung bahan tube:Titanium murni (CP) jeung alloy titanium foil,Kelas 1, Kelas 2, Kelas 5, Kelas 5, Kelas 7 jeung Kelas 9
• Jenis: Seamless Tube, Welded Tube, Coil Tube, Heat exchanger tube, U-Bend Tube, Capillary Tube
• Dimensi:OD: 3～1500mm, WT: 0.2～25mm: Panjangna: ≤19000mm
• Kaayaan:Rolling, las, Machining
• Standar:ASTM B338, ASTM B337, ASTM B861, ASTM B862 jsb
• Aplikasi:Shell jeung tube exchanger panas, condenser, evaporator, pipa,Alat-alat desalinasi cai laut, rak Sapédah, tabung tekanan laut, tabung tekanan pangeboran minyak,
| Bahan alloy titanium Ngaran umum | ||
| Gr1 | UNS R50250 | CP-Ti |
| Gr2 | UNS R50400 | CP-Ti |
| Gr4 | UNS R50700 | CP-Ti |
| Gr7 | UNS R52400 | Ti-0,20 Pd |
| G9 | UNS R56320 | Ti-3AL-2.5V |
| G11 | UNS R52250 | Ti-0,15 Pd |
| G12 | UNS R53400 | Ti-0.3Mo-0.8Ni |
| G16 | UNS R52402 | Ti-0.05Pd |
| G23 | UNS R56407 | Ti-6Al-4V ELI |
Pipa sareng pipa titanium:Titanium seamless tube diolah ku ngarecahna titanium ingot, extruding mun titanium tube billet.Lajeng ngahasilkeun tabung titanium kana ukuran luyu jeung runtuyan prosés kayaning sababaraha rolling, annealing, pickling, sarta téhnologi grinding.
Titanium dilas tube nyaéta ku milih ketebalan cocog tina kualitas luhur tiis digulung plat titanium, sanggeus prosés flattening, motong jeung cuci, teras digulung nepi plat titanium kana tubular, las ku sakabeh parabot las otomatis.alat las canggih kami dijamin kualitas las.Pamustunganana ngabantosan pikeun ngahasilkeun tabung titanium kualitas anu saé.
♦ Pipa titanium Komposisi kimiawi ♦
| Kelas | Komposisi kimia, persén beurat (%) | ||||||||||||
| C (≤) | O (≤) | N (≤) | H (≤) | Fe (≤) | Al | V | Pd | Ru | Ni | Mo | Unsur séjén Max.masing-masing | Unsur séjén Max.total | |
| Gr1 | 0.08 | 0.18 | 0.03 | 0,015 | 0.20 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr2 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr4 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | — | — | — | — | 0.1 | 0.4 |
| Gr5 | 0.08 | 0.20 | 0.05 | 0,015 | 0.40 | 5.56.75 | 3.5 4.5 | — | — | — | — | 0.1 | 0.4 |
| Gr7 | 0.08 | 0.25 | 0.03 | 0,015 | 0.30 | — | — | 0.12 0.25 | — | 0.12 0.25 | — | 0.1 | 0.4 |
| Gr9 | 0.08 | 0.15 | 0.03 | 0,015 | 0.25 | 2.5 3.5 | 2.0 3.0 | — | — | — | — | 0.1 | 0.4 |
| Gr11 | 0.08 | 0.18 | 0.03 | 0.15 | 0.2 | — | — | 0.12 0.25 | — | — | — | 0.1 | 0.4 |
| Gr12 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | — | — | 0.6 0.9 | 0.2 0.4 | 0.1 | 0.4 |
| Gr16 | 0.08 | 0.25 | 0.03 | 0.15 | 0.3 | — | — | 0.04 0.08 | — | — | — | 0.1 | 0.4 |
| Gr23 | 0.08 | 0.13 | 0.03 | 0.125 | 0.25 | 5.5 6.5 | 3.5 4.5 | — | — | — | — | 0.1 | 0.1 |
♦Titanum Galunggung PipaSipat fisik ♦
| Kelas | sipat fisik | |||||
| Kakuatan regangan Min | kakuatan ngahasilkeunMin (0,2%, offset) | Elongation dina 4D Min (%) | Ngurangan Wewengkon Min (%) | |||
| ksi | MPa | ksi | MPa | |||
| Gr1 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr2 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr4 | 80 | 550 | 70 | 483 | 15 | 25 |
| Gr5 | 130 | 895 | 120 | 828 | 10 | 25 |
| Gr7 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr9 | 90 | 620 | 70 | 483 | 15 | 25 |
| Gr11 | 35 | 240 | 20 | 138 | 24 | 30 |
| Gr12 | 70 | 483 | 50 | 345 | 18 | 25 |
| Gr16 | 50 | 345 | 40 | 275 | 20 | 30 |
| Gr23 | 120 | 828 | 110 | 759 | 10 | 15 |
♦ ♦ ♦ Bahan Paduan Titanium Fitur: ♦ ♦ ♦
•Kelas 1: Titanium Murni, kakuatan rélatif lemah sareng ductility tinggi.
•Kelas 2: The titanium murni paling dipaké.Kombinasi pangalusna kakuatan
•Kelas 3: kakuatan High titanium, dipaké pikeun Matrix-pelat dina cangkang jeung tube exchangers panas
•Kelas 5: The alloy titanium paling dijieun.Kakuatan anu luhur pisan.lalawanan panas tinggi.
•Kelas 7: résistansi korosi punjul dina lingkungan réduksi sareng pangoksidasi.
•Kelas 9: kakuatan pisan tinggi na lalawanan korosi.
•Kelas 12: Résistansi panas anu langkung saé tibatan titanium murni.Aplikasi pikeun Kelas 7 sareng Kelas 11.
•Kelas 23: Titanium-6Aluminium-4Vanadium ELI (Tambahan Low Interstitial) Alloy pikeun aplikasi susuk bedah.
